 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTE714 Integrated Circuit Chroma Subcarrier Regeneration Features: D DC Hue Control D Phase Locked Oscillator D Keyed APC and ACC Detector D Internal Shunt Voltage Regulator D 16-Pin Dual In-Line Plastic Package Absolute Maximum Ratings: Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to +85C Storage Temperature Range, Ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to +150C Maximum Voltage and Current Ratings (TA = +25C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Table Current in mA Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Voltage Range in Volts 0 to +10 0 to +16 0 to +16 6.0 to 0 (Note 1) reference 0 to +5.0 0 to VREG 0 to VREG No Connection Note 2 0 to VREG 0 to VREG 0 to VREG 0 to VREG 0 to +16 0 to -16 Input 20 - - 20 1.0 - - - - 50 - - 20 20 - - Output 1.0 - - 1.0 50 - - - - 1.0 - - 1.0 1.0 - - Note 1. Limited by input current Note 2. Dependent on value of external current limiting resistor, 0 to 11V at 0 Static Electrical Characteristics: (TA = +25C unless otherwise specified) Parameter Static Characteristics Regulator Voltage Oscillator Current ACC Leakage APC Leakage ACC Balance APC Balance Oscillator Balance Dynamic Characteristics Frequency Pull-In Range Subcarrier Output Level and Hue Control ACC Output Level Free Running Oscillator Frequency 11 to 12 3 to 2 15 to 16 2 or 3 Burst = 0.4VP-P, Note 1 R1: High, Pin2 = DVM R1: Low, Pin2 = DVM Burst = 0.4VP-P, Note 2 Snort Pin11 to Pin12 +200 +350 -350 120 3.579 245 - - - 150 - - - - - 3.579 845 Hz mV mV mV MHz 10 2 to 3 15 to 16 11 to 12 15 to 16 11 to 12 7 to 8 ICC = 25mA Sw1: Low; Sw2: High Sw1: High; Sw2: Low, Ref Pin10 Sw1: High; Sw2: Low, Ref Pin10 Sw1: High; Sw2: High, Pin16 = -DVM Sw1: High; Sw2: High, Pin12 = -DVM Sw1: High; Sw2: Low, Pin8 = -DVM 11.3 4.1 - - -330 -375 -330 - - 5 40 - - - 12.9 7.6 30 80 +300 +375 +330 V mA mV mV mV mV mV Test Pins Test Conditions Min Typ Max Unit Note 1. Limited by input current Note 2. Dependent on value of external current limiting resistor, 0 to 11V at 0 Pin Connection Diagram Tint Control OSC Output OSC Output Gate In GND OSC Feedback OSC Control OSC Control 1 2 3 4 5 6 7 8 16 ACC Det Output 15 ACC Det Output 14 ACC Det Input 13 APC Det Input 12 APC Det Output 11 APC Det Output 10 VCC 9 N.C. 16 9 .260 (6.6) Max 1 .785 (19.9) Max 8 .300 (7.62) .200 (5.08) Max .245 (6.22) Min .100 (2.54) .700 (17.7) |
Price & Availability of NTE714
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |